Having acquired a Ruger LCR, I decided to put it to the test. Once again the timer and the target tell an interesting story. To make the day a good #wheelgunwednesday, I took four revolvers out; Ruger LCR, S&W 642-2 Airweight J Frame, S&W Model 36-1 (3 inch), and my EDC S&W 43C. The LCR had a Rogers Enhanced LCR stock, the 642-2 wore Sile rubber stocks, the 36-1 had Pachmayr Compac stocks, and the 43C used the standard factory boot grip. Ammunition for the .38s was Tula steel case and for the 43C, CCI Stingers just as I load it for carry.
The test I used for the comparison was my 5^5 drill; five shots in five seconds at five yards into a five inch circle five times in a row. I made up a target for the test so that I could record the times and results on one sheet. The circle is a CD, so it is actually 4.75 inches in diameter, not 5 inches. The markers bleed through and I shoot the back to reduce visual confusion. After shooting each run, I wrote the time on the target.
The very first shots confirmed something I’ve said for a long time; ‘feel’ is utterly irrelevant until the shooting starts. Even then, it needs to be tempered by measurement. The Rogers stock feels really good to handle but during the first string my immediate thought was “Whoa, this thing kicks!” I shot a second string with the 642-2 with the Sile rubber stocks as a comparison and found the recoil much less unpleasant.
The timer and the target sometimes tell interesting and unexpected tales. A long held opinion is that a longer barrel is easier to shoot, both in terms of accuracy and shot to shot recovery, than a shorter barrel. For #wheelgunwednesday, I decided to put this theory to the test. Several different revolvers of varying frame sizes, weights, and barrel lengths were used to shoot a standard drill and compare results.
Justin Dyal wrote an article for SWAT Magazine about a drill he created called Five-Yard Roundup. It was used as the semi-final test at the Rangemaster 2018 Tactical Conference. Especially in the context of snub revolvers, it’s a good test of skills that may be required for personal protection.
For some reason, #wheelgunwednesday had never crossed my radar before yesterday. Viewing this as a serious deficiency on my part, I decided to shoot the IDPA 5×5 Classifier with some revolvers. It’s a 25 round Course of Fire shot entirely at 10 yards.
I like the 5×5 because it’s five shot friendly and is a demanding skill drill. As some shooters have observed, the IDPA 5×5 is not as easy as it looks. It shares this in common with the 5^5 drill that I designed.
Whenever a Course of Fire is shot repeatedly, there’s a ‘training effect.’ This means that simply understanding the sequence helps the shooter do better. Since I was shooting service revolvers down to Airweight J Frames, I chose to bias the training effect in favor of the J Frames, which are inherently harder to shoot. The order I chose to shoot the wheelies was:
- Model 66, four inch (.38 Special)
- Model 65, three inch (.38 Special)
- M&P 5 screw, 2 inch (.38 Special)
- Model 640-1, 2 ¼ inch (.38 Special)
- Model 36-1, 3 inch (.38 Special)
- Model 642-2, 2 inch (.38 Special)
- Model 30, 3 inch (.32 S&W Long)
- Model 432PD, 2 inch (.32 S&W Long)
Shooting the guns from heavy to light also helped keep me from getting beaten up by recoil early in the process. I’m glad I approached it that way.
For the K Frames, I used the KIS “Keepin’ It Sippel” holster from Leather Creek holsters. It’s a very comfortable holster that distributes the weight of a service pistol well on the belt and allows a quick presentation. For the reload on String 3, I used a Safariland Comp II speedloader and pouch. When I bought the M&P 5 screw, it had the half moon front sight that was commonly used in the pre-1950s era. This is not an easy sight to see, so I flattened the rear with a file, serrated it, and painted it fluorescent orange with a white undercoat. All of the K frames also have had the rear sight blackened with a Sharpie to provide more contrast and reduce glare.
For the J Frame .38s, I used a Galco ‘Concealable’ holster. The forward molded design makes it very comfortable because it doesn’t press on my hip bone at the four o’clock position. Reloading was done with a Safariland Comp I speedloader and pouch.
For the J Frame .32s, I used a Bianchi Model 57 ‘Remedy’ holster. This is also a comfortable forward molded design. Reloading was done with an HKS 32-J speedloader and Bianchi pouch.
The ammo used was mostly Tula 130 grain FMJ .38 Special. I can’t recommend this ammo. Probably because of the steel case, it’s very difficult to extract. Most of the time, I have to use a rubber mallet to give the extractor rod a whack to eject the cases. I bought a case of it and when it’s used up, that’s the last I will ever buy. When the stage required a reload, I started with Federal American Eagle 130 grain FMJ, which extracts easily.
In the .32s, I used Georgia Arms .32 S & W Long 85 grain Jacketed Hollow Point and Fiocchi 97 grain FMJ. They both shoot to similar point of impact and proved reliable in the .32s.
#wheelgunwednesday, it’s going to be more of a habit from now on.
Note that the holsters were provided to me at no cost by the manufacturers but I receive no compensation for my evaluation.